PRE-RELEASE
Brief description
| Brief description |
| General |
The Saab Audio System is a complete sound system for the car, including radio reception and a number of other functions.
The audio system is equipped with an electronic theft protection system that interacts with the car by the audio system being “married” to the car and accordingly linked to the car it was first installed in. A check is carried out each time the audio system is turned on to make sure the correct audio system is being used.
The audio system is available in three models: Premium, Prestige and Popular.
Each system contains the following units:
| • |
Main unit:
|
|
| - |
Radio
|
| - |
Cassette player (Premium and Prestige only)
|
| - |
CD Player
|
| • |
SID (display)
|
|
| • |
Amplifier (Premium and Prestige only)
|
|
| • |
Speakers
|
|
| • |
Antenna system
|
|
| • |
Steering wheel switches
|
|
| • |
CD changer (option)
|
|
| Main unit |
The main unit is central to the Saab Audio System and is located in the centre console. The radio, cassette player and CD player are integrated with the main unit. The main unit also contains the controls for the various functions of the audio system.
The main unit communicates with the various other units and systems via the car's bus and wiring harnesses.
| Radio |
The radio module in the audio system is an AM/FM receiver with PLL frequency synthesis for the precise tuning of stations. It is factory-programmed to the frequency bands (2 x 6 AM and 3 x 6 FM) used in the various markets. If there is a loss of power (e.g., the battery is removed), none of the preset stations will be lost.
The audio system fitted to cars for the EU market incorporates RDS radio based on the double tuner system, which improves the quality of RDS reception and RDS radio services.
| Cassette Player |
The cassette player is front-feed. The mechanical functions are fully microprocessor-controlled to reduce the load on the tape. Auto-reverse, track search and blank skip are included.
| CD Player |
The CD player is front-feed with display for the compact disc inserted. The disc drawer holds 1 disc (diam. 8 or 12 cm). Random play and scan functions are included.
| Display |
The audio system uses the SID to show the current settings for the selected source.
The main unit transmits the display information on the bus, from where SID reads it.
| Amplifier |
The Premium and Prestige audio systems both have external amplifiers. The amplifier in the Prestige system has a higher output power than the Premium. It is available in two models, one for the 4D and one for the 5D.
Premium has 7 output channels and Prestige 9 output channels for speakers. The two additional output channels on the Prestige system are for bass speakers in the parcel shelf on the 4D or on the right-hand side of the luggage compartment on 5D.
The amplifier has a separate power supply. It is not connected to the bus.
| Speakers |
The Premium and Prestige audio systems have side and centre speakers in the dashboard and speakers in the front and rear doors. The Prestige system also includes bass speakers in the parcel shelf on 4D cars and one bass speaker on the right-hand side of the luggage compartment on 5D cars.
The Popular audio system has side speakers in the dashboard and speakers in the rear doors.
| Antenna system (4D) |
There are two different types of antenna system for radio reception:
| • |
Antenna system 1 consists of an AM and an FM antenna with an antenna amplifier. System 1 is fitted to the car as standard in the EU and PA markets.
Antenna system 1 is also used for a make of radio different to that used by Saab in the Saab Audio System. |
|
| • |
Antenna system 2 consists of an AM, an FM1 and an FM2 antenna with an antenna amplifier. System 2 is fitted as standard in cars for the US and JP markets.
Antenna system 2 can only be used for the main units of the Premium and Prestige systems. |
|
The antennas are fitted to the rear window. The AM antenna forms a separate loop and the FM antennas are integrated with the heating element on the rear window. The rear window is the same for both antenna systems, which allows the option of upgrading from antenna system 1 to 2.
The antenna amplifier is powered from the main unit and the amplified antenna signal is supplied to the radio via a coaxial cable.
| Antenna system (5D) |
There are two different types of antenna system for radio reception:
| • |
Antenna system 1 is intended for audio system: Popular, Premium and Prestige and comprises:
|
|
| - |
an AM and FM antenna with antenna amplifier and coaxial cable for connecting between the amplifier and the main unit.
|
| • |
Antenna system 2 is intended for audio systems: Premium and Prestige and comprises:
|
|
| - |
an AM and FM antenna with antenna amplifier and coaxial cable for connecting between the amplifier and the main unit.
|
| - |
an FM antenna with antenna amplifier and a coaxial cable for connecting between the two antenna amplifiers.
|
The AM/FM antenna is located in the rear right side window and its antenna amplifier in the roof above the rear right side window.
The FM antenna is located in the rear left side window and its antenna amplifier in the roof above the rear left side window.
The antenna system can be upgraded to antenna system 2 on markets where antenna system 1 is fitted as standard.
The antenna amplifier is powered from the main unit and the amplified antenna signal is supplied to the radio via a coaxial cable.
| CD changer |
A CD changer is available as an accessory for fitting in the luggage compartment of 4D and 5D models. The CD changer cartridge holds 6 CDs.
The CD changer is connected to the bus, via which it communicates with the main unit. It is activated (powered) when it receives a “Wake-up” signal from the main unit via the bus. The sound signal (balanced line output) from the CD changer is sent to the amplifier and speakers via the main unit.
The car is prewired for a CD changer as standard.
| Steering wheel switches |
The steering wheel is fitted with special switches to enable the most important functions of the audio system to be operated simply and reliably.
The switches are connected to SID which reads their positions and sends information to the main unit via the bus.
| P-bus and I-bus |
The bus allows large quantities of data to be sent between the control modules using only two cables. The bus is divided into a Powertrain bus (P-bus) and an Instrument bus (I-bus).
The Trionic, TCM and TC/ABS powertrain systems require fast data communication so that no noticeable delays occur, e.g. for torque limitation when changing gear.
Trionic, TCM and TC/ABS are connected to the P-bus, on which data transfer is ten times faster than on the I-bus.
The P-bus and I-bus are connected to MIU. MIU is responsible for making information on one bus available to the other bus.
The diagnostic instrument is not connected directly to the bus but communicates via the DICE, one of the control modules connected to the I-bus, and so has access to all control modules connected to the bus.
Vehicle speed data is important for many control modules. Since ABS is not connected to the bus, the vehicle speed signal is sent on a separate lead from ABS to MIU. MIU then sends the data over the buses. In cars with Traction Control, the TC/ABS sends vehicle speed data to the MIU via the P-bus.
