PRE-RELEASE
Light alignment, fog lights, Aero
| Light alignment, fog lights, Aero |
| 1. |
Measure the distance from the centre of the lens to the floor. Mark a wall (90° straight out from the lamp lens) with a cross at this height.
|
|
| 2. |
Turn on the fog lights.
|
|
| 3. |
Turn the adjusting screw until the light beam is approximately 1-2% of the distance between the car and the wall below the horizontal of the cross (e.g. 10-20 cm under the cross if the distance to the wall is 10 m).
|
|
