PRE-RELEASE
Load angle sensor, rear
| Load angle sensor, rear |
| To remove |
| 1. |
Raise the car.
|
|
| 2. |
Unplug the sensor.
|
|
| 3. |
Loosen the upper link arm ball joint.
|
|
| 4. |
Unscrew the level sensor and remove it with the bracket.
|
|
| 5. |
Remove the sensor from the bracket by undoing the screws.
|
|
| To fit |
| 1. |
Fit the sensor to the bracket by screwing in the screws.
|
|
| 2. |
Bolt the bracket and level sensor into place.
|
|
| 3. |
Fit the link arm ball joint.
|
|
| 4. |
Plug in the connector.
|
|
| 5. |
Calibrate both AHL control modules, see
Xenon lighting system, calibration
.
|
|
