PRE-RELEASE
Engine management system, V6 diesel (Del 3/3)
| Engine management system, V6 diesel (Del 3/3) |
| List of components |
| No. | Name Location | Illus. |
|
Components |
||
|
202
|
Temperature sensor, coolant
on coolant pipe on LH side of engine |
|
|
206a
|
Injector, cylinder 1,
on top of rear cylinder bank |
|
|
206b
|
Injector, cylinder 2,
on top of front cylinder bank |
|
|
206c
|
Injector, cylinder 3,
on top of rear cylinder bank |
|
|
206d
|
Injector, cylinder 4,
on top of front cylinder bank |
|
|
206e
|
Injector, cylinder 5,
on top of rear cylinder bank |
|
|
206f
|
Injector, cylinder 6,
on top of front cylinder bank |
|
|
243
|
Level monitor, engine oil,
above oil pan gasket |
|
|
408
|
Engine speed sensor
on RH side of engine by crankshaft pulley |
|
|
555
|
Camshaft position sensor
on RH side of front cylinder bank |
|
|
603
|
Pressure sensor, charge air,
on top of rear cylinder bank inlet pipe |
|
|
606A
|
EGR control valve, connector A
on RH side of engine between cylinder banks (lower connector) |
|
|
606B
|
EGR control valve, connector B
on RH side of engine between cylinder banks (upper connector) |
|
|
651
|
Temperature sensor, fuel
on rear cylinder bank by vacuum pump |
|
|
652a
|
Fuel pressure control valve, common rail
lower valve on rear end of fuel pump |
|
|
652b
|
Fuel pressure control valve, common rail
upper valve on rear end of fuel pump |
|
|
653
|
Fuel pressure sensor, common rail
on the left-hand side of the fuel rail |
|
|
654
|
Position sensor guide rails, turbocharger
in turbocharger vacuum unit |
|
|
655A
|
Control module, V6 diesel, switch A,
in space (cabin side) in front of the windscreen on the passenger side |
|
|
655B
|
Control module, V6 diesel, connector B
in space (cabin side) in front of the windscreen on the passenger side |
|
|
656A
|
Power stage, injectors, connector A
inside the glove box |
|
|
656B
|
Power stage, injectors, connector B
inside the glove box |
|
|
|
6-pin connector |
|
|
H6-5
|
By the EGR valve
|
|
|
|
42-pin connector |
|
|
H42-5
|
In the centre of the bulkhead partition (engine bay side)
|
|
|
|
Crimp connections |
|
|
J25
|
Approx. 80 mm from branching of camshaft position sensor towards connector H42-5
|
|
|
J26
|
Approx. 50 mm from engine control module connector B towards connector A
|
|
|
J27
|
Approx. 120 mm from branching of camshaft position sensor towards connector H42-5
|
|
|
J29
|
LHD:
Approx. 180 mm from branching of connector H42-5 towards grounding point G7
RHD: Approx. 355 mm from connector H42-5 towards grounding point G7 |
|
|
J33
|
LHD:
Approx. 220 mm from branching of connector H42-5 towards grounding point G7
RHD: Approx. 395 mm from connector H42-5 towards grounding point G7 |
|
|
J34
|
Approx. 40 mm from branching of camshaft position sensor towards connector H42-5
|
|
|
J178
|
In connector H42-5
|
|
|
J179
|
Approx. 100 mm from connector B of injector power module
|
|
