PRE-RELEASE
PSG16 engine management system (Part 2/2)
| PSG16 engine management system (Part 2/2) |
| List of components |
| No. | Name Location | Illus. |
|
|
Components |
|
|
179a
|
Solenoid valve, charge air,
in the engine bay on the bulkhead partition wall by connector H42-5 |
|
|
202
|
Coolant temperature sensor, engine management system,
on thermostat housing |
|
|
205
|
Mass air flow sensor,
behind the RH headlamp |
|
|
243
|
Level monitor, engine oil,
in the middle at the front of the oil pan above the oil temperature sensor |
|
|
345
|
Crankshaft position sensor,
under oil filter |
|
|
398a
|
Glow plug, cylinder 1,
in rear upper part of cylinder head |
|
|
398b
|
Glow plug, cylinder 2,
in rear upper part of cylinder head |
|
|
398c
|
Glow plug, cylinder 3,
in rear upper part of cylinder head |
|
|
398d
|
Glow plug, cylinder 4,
in rear upper part of cylinder head |
|
|
403
|
Solenoid valve, swirl throttle,
in front of coolant reservoir |
|
|
407
|
Intake air temperature sensor,
on throttle body (integrated in 688) |
|
|
501
|
Main fuse box, maxi fuses,
under battery cover |
|
|
559
|
Temperature sensor, engine oil,
in the middle at the front of the oil pan |
|
|
595M
|
PSG16 control module, connector M,
on front of engine |
|
|
596
|
Glow plug control module,
by right spring strut |
|
|
603
|
Pressure sensor, charge air,
on throttle body (integrated in 688) |
|
|
606
|
EGR control valve,
on the throttle body |
|
|
688
|
Sensor, intake air,
on the throttle body |
|
|
|
16-pin connector |
|
|
H16-8
|
On bracket in front of RH engine mounting
|
|
|
|
33-pin connector |
|
|
H33-1
|
At the relay box in the dashboard
|
|
|
Crimp connections |
|
|
|
J55
|
LHD:
Approx. 125 mm from branching point DICE control module towards the main relay board
RHD: Approx. 430 mm from branching of grounding point G42 towards DICE control module |
|
|
J56
|
LHD:
Approx. 20 mm from branching of DICE control module towards engine bay grommet
RHD: Approx. 310 mm from rear of DICE control module connector towards the engine bay |
|
|
J227
|
Approx. 100 mm from connector H16-8
|
|
|
J228
|
Approx. 70 mm from the branching point of grounding point G31 towards the RH headlamp.
|
|
|
J229
|
Approx. 240 mm from connector H33-1
|
|
