PRE-RELEASE
Trionic T7 engine management system 4-cyl (Part 4/4)
| Trionic T7 engine management system 4-cyl (Part 4/4) |
| List of components |
| No. | Name Location | Illustration |
|
|
Components |
|
|
22a
|
Fuse box, dashboard
on the dashboard end by the driver's door |
|
|
102
|
Relay, fuel pump,
on the main relay board in the dashboard |
|
|
229
|
Main relay, engine control system,
on the main relay board in the dashboard |
|
|
271
|
Heating element, heated oxygen sensor,
integrated in the heated oxygen sensor |
|
|
323
|
Motor, fuel pump,
in the fuel tank |
|
|
585
|
Pressure sensor, EVAP,
on the fuel tank by the fuel pump |
|
|
588
|
Solenoid valve, EVAP shut-off,
by fuel filler pipe |
|
|
589
|
Trionic control module, 4-cyl petrol,
in space (cabin side) in front of windscreen on passenger side |
|
|
592Fa
|
Heated oxygen sensor 1,
in front of the catalytic converter |
|
|
592Ra
|
Heated oxygen sensor 2,
after the catalytic converter |
|
|
|
2-pin connector |
|
|
H2-43
|
By the EVAP canister
|
|
|
|
4-pin connector |
|
|
H4-2
|
Under the rear seat
|
|
|
|
16-pin connector |
|
|
H16-6
|
Grey connector in cable conduit in front of airbag control module
|
|
|
24-pin connector |
|
|
|
H24-1
|
Grey connector in middle of bulkhead partition (engine compartment side)
|
|
|
H24-2
|
Black connector in middle of bulkhead partition (engine compartment side)
|
|
|
|
42-pin connector |
|
|
H42-5
|
In the middle of the bulkhead partition (engine compartment side)
|
|
|
|
80-pin connector |
|
|
H80-1
|
In the connector bracket under the LH A-pillar
|
|
|
|
Crimp connectors |
|
|
J16
|
LHD:
Approx. 20 mm from cable tie on Trionic control module connector
RHD: Approx. 35 mm from cable tie on the Trionic control module connector |
|
|
J17
|
Approx. 70 mm from the cable tie on the connector for the Trionic engine control module.
|
|
|
J20
|
Approx. 115 mm from branching crankshaft position sensor towards connector H42-5
|
|
|
J21
|
Approx. 55 mm from branching point crankshaft position sensor towards connector H42-5
|
|
|
J22
|
Approx. 20 mm from branching point crankshaft position sensor towards connector H42-5
|
|
|
J55
|
LHD:
Approx. 125 mm from branching point DICE control module towards the main relay board
RHD: Approx. 430 mm from branching of grounding point G42 towards DICE control module |
|
|
J58
|
LHD:
Approx. 50 mm from branching of MIU towards DICE control module
RHD: Approx. 260 mm from rear edge of DICE control module connector towards the engine bay |
|
|
J83
|
LHD:
Approx. 200 mm from branching of DICE control module towards main fuse box
RHD: Approx. 220 mm from branching of grounding point G42 towards DICE control module |
|
|
J93
|
Approx. 300 mm from branching point of grounding point G5 towards the LH rear door.
|
|
|
|
Grounding points |
|
|
G5
|
Under LH corner of rear seat
|
|
