PRE-RELEASE
Steering swivel member
| Steering swivel member |
| To remove |
| 1. |
Remove the front wheel hub as described under
To remove
.
|
|
| 2. |
Remove the wheel sensor.
|
|
| 3. |
Undo the nut securing the track-rod end and withdraw the track-rod end using
87 91 287 Puller, 150 mm
.
|
|
| 4. |
Remove the steering swivel member from the MacPherson strut. Hold the bolt steady and undo the nut.
Tap out the bolt. Use a new bolt on reassembly.
|
|||||||
| To fit |
| 1. |
Fit the steering swivel member to the MacPherson strut with new bolts. Hold the bolt steady and turn the nut.
Tightening torque 100 Nm +90° (74 lbf ft +90°) 
|
|||||||
| 2. |
Fit the track-rod end.
Tightening torque 35 Nm (26 lbf ft) 
|
|
| 3. |
Fit the front wheel hub, refer to
To fit
.
|
|
