PRE-RELEASE
Anti-roll bar
| Anti-roll bar |
| 1. |
Raise the car and remove the rear wheels.
|
|
| 2. |
Remove the anti-roll bar retaining nuts and bolts.
|
|
| 3. |
Remove the anti-roll bar.
|
|
| To fit |
| 1. |
If necessary, lubricate the anti-roll bar bushes with Molycote 33 (bushes on new anti-roll bars are already lubricated), position the anti-roll bar and fit all the bolts and nuts.
|
|
| 2. |
Tighten the nuts and bolts.
Tightening torque 50 Nm (40 lbf ft) |
|
| 3. |
Fit the wheels, see
Wheels
.
Tightening torques aluminium rim 110 Nm (81 lbf ft) pressed steel rim 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft) |
|
| 4. |
Lower the car to the floor.
|
|
