PRE-RELEASE
Boot lid lock motor, 4D
| Boot lid lock motor, 4D |
| 1. |
Remove the trim from the inside of the boot lid.
US/CA cars: Push the emergency opening handle through the hole in the trim. |
|
| 2. |
Turn the clip securing the locking rod for the lock motor driver.
|
|
| 3. |
Remove the locking rod.
|
|
| 4. |
Press out the centre pin in the driver and remove the driver. Let the driver hang on the locking rod to the key lock.
|
|
| 5. |
Undo the lock motor retaining screws and unplug the connector.
|
|
| 6. |
Lift out the lock motor.
|
|
| To fit |
| 1. |
Screw on the motor and plug in the connector.
|
|
| 2. |
Fit the driver.
|
|
| 3. |
Fit the locking rod to the lock motor driver.
US/CA cars: Push the emergency opening handle through the hole in the trim. |
|
| 4. |
Fit the boot lid trim.
|
|
