PRE-RELEASE
Receiver
| Receiver |
| To remove |
| 1. |
Drain the refrigerant from the A/C system. See
Draining and filling of refrigerant
.
|
|
| 2. |
Place the car on a lift and raise it.
|
|
| 3. |
Remove the front cover below the radiator core.
|
|
| 4. |
Cars with cooling pipe
: Remove the front cooling pipe from the battery cover.
|
|
| 5. |
Remove the A/C pipes' PAD connections from the condenser and receiver. Plug the openings.
|
||||||||||
| 6. |
Detach the receiver from the condenser mounting and remove it.
|
|
| To fit |
| 1. |
Raise the receiver and fit it in its mounting.
|
|
| 2. |
Replace the O-rings and lubricate with acid-free vaseline, part no. 30 06 665. Then fit the A/C pipes' PAD connections to the condenser and receiver.
Tightening torque: 8 Nm (6 lbf ft) |
|
| 3. |
Cars with cooling pipe
: Fit the front cooling pipe to the battery cover.
|
|
| 4. |
Fit the front cover below the radiator core.
|
|
| 5. |
Lower the car to the floor.
|
|
| 6. |
Evacuate the A/C system and fill with refrigerant R134. See
Draining and filling of refrigerant
.
|
|
