SAAB WIS ONLINE

PRE-RELEASE

B-pillar trim

B-pillar trim

To remove

Warning

Take care not to damage or loosen the energy absorbers. Damaged or loose energy absorbers must not be refitted. If the occasion should arise, the entire headlining must be changed. Damaged energy absorbers may impair head protection in case of a collision.




1. Move the seat as far forward as possible.

2. Pull off the B-pillar trim (fastened with clips) and lift up the pillar trim out of the air duct.

3. Remove the seat belt mounting on the front seat by pressing in the catch using a curved screwdriver.

4. Remove the strap guide and pull the belt through the B-pillar trim.


To fit

Warning

Take care not to damage or loosen the energy absorbers. Damaged or loose energy absorbers must not be refitted. If the occasion should arise, the entire headlining must be changed. Damaged energy absorbers may impair head protection in case of a collision.


Note

Check that the carpet and sill scuff plate are covered by the B-pillar trim.

Check that the door sealing mouldings fit correctly.


Fit in reverse order.

PRE-RELEASE