PRE-RELEASE
Switch panel
| Switch panel |
| 1. |
Ignition switch in the OFF position.
|
|
| 2. |
Remove the upper and lower steering column covers, 3 screws.
|
|
| 3. |
Detach the direction indicator and windscreen wiper stalk switches.
|
|
| 4. |
Remove the SID unit and the radio if fitted. Unplug the connectors and the antenna.
|
|
| 5. |
Remove the heating and ventilation panel and unplug the connector.
|
|
| 6. |
Remove the cover on the side of the dashboard.
Remove the light control panel and connector. |
|
| 7. |
Remove the switch for the hazard flashers and the connector.
Remove the remaining switches and their connectors. |
|
| 8. |
Remove the switch panel, 6 screws, fastened with 4 clips.
|
|
| 9. |
Lift out the switch panel.
|
|
| To fit |
| 1. |
Put the switch panel back in place.
|
|
| 2. |
From the driver's side, check that the air ducts are correctly positioned.
|
|||||||
| 3. |
Fit the switch panel, fasten with 4 clips and 6 screws.
|
|||||||
| 4. |
Refit the switch for the hazard flashers and reconnect the connector from behind.
Connect and fit the remaining switches. |
|
| 5. |
Connect and refit the light control panel.
Refit the cover on the side of the dashboard. |
|
| 6. |
Connect and fit the heating and ventilation panel.
|
|
| 7. |
Connect and fit the SID unit and the radio unit if present.
|
|
| 8. |
Replace the direction indicator and windscreen wiper stalk switches.
|
|
| 9. |
Refit the upper and lower steering column covers, 3 screws.
|
|
