PRE-RELEASE
011
Symptom: Parking heater fails to start.
| 011 |
Undervoltage cut-out. Activated.
Fault symptom
Parking heater fails to start.Condition
Parking heater activated.B+ less than 10.2 V.
Diagnostic help
Parking heater can be activated with Tech 2.Parking heater function can be programmed in SID.
Eberspächer diagnostics instrument used for diagnosis.
Diagnostic procedure
1 Check the battery
| • |
Check battery condition.
|
|
| • |
Start the engine.
|
|
| • |
Check battery voltage at different engine rpm.
|
|
| • |
Red test lead: B+.
|
|
| • |
Black test lead: B-.
|
|
| • |
Voltage should be higher than 10.5 V.
|
|
Test results OK?
| YES |
-
Go to point 3.
| NO |
-
Go to point 2.
2 Check the component
| • |
Check the accumulator and the regulator. See group 3 Electrical system, ’Components’.
|
|
Test results OK?
| YES |
-
Check the battery. See group 3 Electrical system, ‘Components’.
-
Go to point 5.
| NO |
-
Repair or replace the faulty component.
-
Go to point 5.
3 Check B+
| • |
Check voltage at connector B1.
|
|
| • |
Red test lead: Pin 1.
|
|
| • |
Black test lead: Pin 2.
|
|
| • |
B+ should be obtained.
|
|
Test results OK?
| YES |
-
Go to point 4.
| NO |
-
Check that there is no corrosion or loose contact in the lead between pin 1 in B1 and the fuse.
-
Go to point 4.
4. Final check
| • |
Delete DTCs in all systems.
|
|
| • |
Contact: SID.
|
|
| • |
Activate parking heater (ON).
|
|
| • |
Perform a functionality check.
|
|
| • |
Evaluate the functionality check.
|
|
| • |
Check that the diagnostic trouble code has not recurred.
|
|
Test results OK?
| YES |
-
Fault rectified successfully.
| NO |
-
See ’Procedure for replacement of control module’.
