PRE-RELEASE
Exhaust hose reel
| Exhaust hose reel |
When the hose is extended to the desired length, it is then locked in that position. The locking device is released by pulling the hose out a bit more. The hose then automatically rolls up to its original position.
The reel is mounted in the ceiling or on the wall and is connected to a fan or to an existing extraction system. There are several different hose grades.
An accessory for best energy economy is available where by a mechanic or automatic throttle is mounted to start/stop the fan motor.
Contact your supplier for more information or an estimation of the ventilation.
| Dimensions |
The reel is available for hose diameters from 3" to 6". For passenger car workshops, we recommend the 4" diameter and a hose length of 5-7.5 m.
Stand
|
Length
|
740 mm
|
|
Width
|
600-700 mm
|
|
Height
|
730-780 mm
|
|
Weight without hose
|
34 kg
|
Compare with the following equipment:
| • |
Nederman
Internet address: www.nederman.com |
|
| • |
Alentec Orion
Internet address: www.alentec.com |
|
| • |
Plymo Vent
Internet address: www.plymovent.com |
|
