PRE-RELEASE
Headlamps
| Headlamps |
| Removal |
| 1. |
Remove the upper plastic clips and the screws.
|
|
| 2. |
Remove the screws from the wing liner.
|
|
| 3. |
Free the bumper shell by freeing the hook with a screwdriver. Bend the shell forwards and place a support under so that it is not damaged.
|
|
| 4. |
Remove the bolts.
|
|
| 5. |
Lift out the headlamp and unplug the connector.
|
|
| Refitting |
| 1. |
Plug in the connector.
|
||||||||||
| 2. |
Position the headlamp correctly.
|
|
| 3. |
Fit the upper and lower bolts.
|
|
| 4. |
Adjust the spacer bolt so that it lightly contacts the headlamp mounting on the chassis.
|
|
| 5. |
Fit the bolt.
|
|
| 6. |
Position the bumper shell correctly.
|
|||||||
| 7. |
Fit the upper plastic clips and the screws.
|
|
| 8. |
Fit the wing liner bolts.
|
|
| 9. |
Check headlamp alignment and adjust as necessary, see
Headlamp adjustment
.
|
|
