PRE-RELEASE
Horn
| Horn |
| Removal |
| 1. |
Remove the upper plastic clip.
|
|
| 2. |
Remove the screws from the wing liner.
|
|
| 3. |
Free the bumper shell by freeing the hook with a screwdriver. Bend the shell forwards and place a support under so that it is not damaged.
|
|
| 4. |
Unplug the connector.
|
|
| 5. |
Remove the horn retaining nut.
|
|
| Refitting |
| 1. |
Check that the horn has the correct tone.
The high-tone horn is marked H and the low-tone L. |
|
| 2. |
Fit the horn at a 15-20° angle downwards/outwards.
|
|
| 3. |
Plug in the connector.
|
|
| 4. |
Position the bumper shell correctly.
|
|
| 5. |
Fit the upper plastic clip.
|
|
| 6. |
Fit the wing liner bolts.
|
|
