Main beam lamp, halogen, replacement
|
|
Main beam lamp, halogen, replacement
|
|
Note
|
|
Fit bulbs with correct rating only, the wiring can otherwise be damaged.
|
|
1.
|
Remove the cover.
|
Note
|
|
Push the engine air intake hose backwards to improve access on the right-hand side. To improve access on the left-hand side, the battery cover should be removed.
|
|
|
2.
|
Hold the electrical connector and wiggle the lamp slightly up and down while pulling it outwards.
|
|
3.
|
Disconnect the electrical connector from the bulb.
|
|
4.
|
Fit the new bulb to the electrical connector without touching the bulb lens with the fingers.
|
|
5.
|
Fit the lamp into its mounting in the reflector by slightly wiggling the lamp up and down while pushing it forwards.
|
