PRE-RELEASE
Outer light cluster, rear 4D
| Outer light cluster, rear 4D |
| 1. |
Unscrew the nuts holding the side trim and fold down the trim.
|
|
| 2. |
Loosen the lamp holder.
|
|
| 3. |
Unscrew the lamp housing retaining nuts and remove the rear light.
|
|
| To fit |
| 1. |
Position the lens correctly and screw on the retaining nuts.
|
|
| 2. |
Fit the lamp holder.
|
|
| 3. |
Fit the trim.
|
|
| Replacement of lamp bulb |
| 1. |
Open the cover in the trim.
|
|
| 2. |
Undo the lamp holder.
|
|
| 3. |
Change the bulb in the lamp holder.
|
|
| 4. |
Fit the bulb holder.
|
|
| 5. |
Put back the trim cover.
|
|
