PRE-RELEASE
Control module, OIM, OnStar (4D)
| Control module, OIM, OnStar (4D) |
| To remove |
| 1. |
Remove the key from the ignition switch.
|
|
| 2. |
Remove the
parcel shelf trim
.
|
|
| 3. |
Unplug the control module connector.
|
|
| 4. |
Undo the nut.
|
|
| 5. |
Remove the bolt.
|
|
| 6. |
Lift out the control module.
|
|
| To fit |
| 1. |
Place the control module in the correct position.
|
|
| 2. |
Fit the bolt.
|
|
| 3. |
Tighten the nut.
|
|
| 4. |
Plug in the connector.
|
|
| 5. |
Fit the
parcel shelf trim
.
|
|
| 6. |
Erase fault codes.
|
|
| 7. |
Check that the system is functioning.
|
|
