PRE-RELEASE
B1110
Read the instructions below then start the fault diagnostic procedure.
Symptom: The intermittent windscreen wipers are either not working or the wipers are in constant motion.
| B1110 |
Windscreen wiper relay
Fault symptoms
The intermittent windscreen wipers are either not working or the wipers are in constant motion.Conditions
The control module output is monitored and a DTC generated if there is a:| • |
Break/short circuit to ground.
|
|
| • |
Short circuit to B+.
|
|
DTCs are not generated if the voltage is below 11 V and the diagnostic communication is in use.
