SAAB WIS ONLINE

PRE-RELEASE

Active components in different gear positions

Active components in different gear positions

Pos.

S1

S2

S3

S4

S5

C1

C2

C3

B1

B2

B3

B4

B5

P

Parking

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

R

Drive in reverse

≤ 7 km/h

OFF

OFF

ON

OFF

ON

OFF

ON

OFF

OFF

OFF

ON

OFF

ON

Drive in reverse

> 7 km/h

ON

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

N

Neutral

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

D

1st

ON

OFF

ON

OFF

On for engine braking

ON

OFF

OFF

OFF

OFF

ON for E/G

OFF

ON

2nd

OFF

ON

ON

OFF

OFF

ON

OFF

OFF

ON

ON

OFF

OFF

ON

3rd

OFF

ON

ON

ON

OFF

ON

OFF

OFF

ON

ON

OFF

ON

OFF

4th

OFF

ON

OFF

ON

OFF

ON

OFF

ON

ON

ON

OFF

OFF

OFF

5th

OFF

OFF

OFF

ON

OFF

ON

ON

ON

OFF

ON

OFF

OFF

OFF

4

1st

ON

OFF

ON

OFF

OFF

ON

OFF

OFF

OFF

OFF

OFF

OFF

ON

2nd

OFF

ON

ON

OFF

OFF

ON

OFF

OFF

ON

ON

OFF

OFF

ON

3

3rd

OFF

ON

ON

ON

OFF

ON

OFF

OFF

ON

ON

OFF

ON

OFF

4th

OFF

ON

OFF

ON

OFF

ON

OFF

ON

ON

ON

OFF

OFF

OFF

L

5th

OFF

OFF

OFF

ON

OFF

ON

ON

ON

OFF

ON

OFF

OFF

OFF

GEARCHANGE

1-2

OFF

ON

ON

OFF

OFF

ON

OFF

OFF

OFF/ON

OFF/ON

OFF

OFF

ON

2-3

OFF

ON

ON

ON

ON

ON

OFF

OFF

ON

ON

OFF

OFF-ON

ON-OFF

3-4

OFF

ON

OFF

ON

ON

ON

OFF

OFF-ON

ON

ON

OFF

ON-OFF

OFF

4-5

OFF

OFF

OFF

ON

OFF

ON

OFF-ON

ON

ON-OFF

ON

OFF

OFF

OFF

4-2

OFF

ON

OFF

OFF

ON

ON

OFF

ON-OFF

ON

ON

OFF

OFF

OFF-ON

Position D

5th

OFF

OFF

OFF

OFF

OFF

ON

OFF

ON

ON

ON

OFF

OFF

OFF

Position 2

2nd

OFF

ON

ON

OFF

OFF

ON

OFF

OFF

ON

ON

OFF

OFF

ON



Clutches:

A clutch connects 2 rotating units together.

C1: Connects the input shaft with the rear planetary gear train's (P1) ring gear.

C2: Connects the input shaft with the common sun wheel of the planetary gear trains (P1 and P2).

C3: Connects the lower planetary gear train's (P3) planet carrier with the sun wheel.

Brakes:

The brakes are mounted on the gearcase. On activation, a brake locks the rotating unit in the housing.

B1: Locks the primary shaft's front sun gear.

B2: Prevents the forward sun-gear on the input shaft from rotating anti-clockwise.

B3: Locks the input shaft's front ring gear.

B4: Locks the planetary gear set's (P3) sun gear on the output shaft.

B5: Locks the output shaft's rear carrier.

Freewheel:

F1: Prevents the front planetary gear set's (P2) sun gear from rotating anticlockwise when B2 is applied.

F2: Prevents the front planetary gear train's (P2) ring gear from rotating anticlockwise.

Solenoid valve S1

Open at zero current.

Solenoid valve S2

Open at zero current.

Solenoid valve S3

Closed at zero current.

Solenoid valve S4

Open at zero current.

Solenoid valve S5

Closed at zero current.

Selector lever position

S1

S2

S3

S4

S5

1

ON

OFF

ON

OFF

OFF

2

OFF

ON

ON

OFF

OFF

3

OFF

ON

ON

ON

OFF

4

OFF

ON

OFF

ON

OFF

5

OFF

OFF

OFF

ON

OFF



PRE-RELEASE