SAAB WIS ONLINE

Sealing ring - selector rod in car, VIN 43501883 -

Sealing ring - selector rod in car, VIN 43501883 -

To remove


1. Remove linkage, VIN 43501883 -

2. Prise out the seal using a narrow screwdriver.


Important

Do not damage the sealing surface on the selector rod.



To fit



1. Clean the selector rod and check that it has no burrs.

2. Wind a layer of thin, smooth plastic tape around the selector rod as illustrated (A).

3. Lubricate the gear selector rod and fit the seal. Remove the tape and tap in the seal using 87 90 685 Fitting tool (B).

4. Fit linkage, VIN 43501883 -

5. Check the oil level in the gearbox and top up if needed. Use 87 92 590 Tool, oil level plug .