PRE-RELEASE
Access cover for ISOFIX hooks, rear seat
| Access cover for ISOFIX hooks, rear seat |
| To remove |
| 1. |
Fold up the seat cushion.
|
|
| 2. |
Fasten a cable tie round the mounting brackets. Tighten the cable tie so that the brackets clear the lugs in the seat squab.
|
|
| 3. |
Pull the access cover away.
|
|
| To fit |
| 1. |
Tighten the mounting brackets to a dimension (A) of about 153 mm.
|
|
| 2. |
Press the cover into place.
|
|
| 3. |
Remove the cable tie and feel to make sure that the cover's mounting brackets are firmly attached to the seat squab.
|
|
| 4. |
Lower the seat squab.
|
|
