Seat cowl, upper and lower
|
|
Seat cowl, upper and lower
|
|
1.
|
Manual front seat:
Remove the height adjustment lever (A) and the backrest adjustment knob (B).
|
Note
|
|
When removing the adjustment knob the backrest rake axle can come out with the knob.
|
|
|
2.
|
Remove the upper seat cowl, 2 covers and 3 screws (C).
Electrically adjustable seat:
There is a protective cap on the tip of the front screw. Keep this cap safe and refit it to the screw to prevent damage to the electrical cables.
Bend up the rear edge of the cowl and pull it forwards.
|
|
3.
|
Electrically adjustable front seat:
Unplug the connector (A) for the switch and memory buttons (B), if any.
|
|
4.
|
Remove the lower seat cowl, 2 screws (A).
|
|
1.
|
Fit the lower seat cowl, 2 screws (A).
|
|
2.
|
Electrically adjustable front seat:
Fit the switch and memory buttons (B), if any. Plug in the connector (A).
|
|
3.
|
Fit the upper seat cowl, 3 screws and 2 covers (C).
Electrically adjustable seat:
There is a protective cap on the tip of the front screw. Keep this cap safe and refit it to the screw to prevent damage to the electrical cables.
Bend up the rear edge of the cowl and pull it forwards.
|
|
4.
|
Manual front seat:
Fit the height adjustment lever (A) and the backrest adjustment knob (B).
|
Note
|
|
When removing the adjustment knob the backrest rake axle can come out with the knob.
|
|
|
Important
|
|
Electrically adjustable seat:
Fit the protection on the front bolt.
|
|
|
|
Note
|
|
If required, removing the backrest upholstery can make it easier to position the backrest rake axle. Check that the backrest upholstery is not pinched between the cowl and the backrest. The upholstery should lie over the axle.
|
