PRE-RELEASE
Upholstery, rear seat
| Upholstery, rear seat |
| 1. |
Remove the seat cushion from the car, see
.
|
|
| 2. |
Release the upholstery strips along the edge and lift the rear steel plate to one side.
|
|
| 3. |
Cut the staples securing the seat upholstery to the foam cushion.
|
|
| 4. |
Remove the seat upholstery.
|
|
| To fit |
| 1. |
Fit the upholstery to the seat cushion.
|
|
| 2. |
Fit the staples using the pliers in fitting kit 84 71 062.
|
|
| 3. |
Roll the upholstery over the foam cushion.
|
|
| 4. |
Turn the cushion over and position the rear plate.
|
|
| 5. |
Fit the upholstery strips along the edge.
|
|
| 6. |
Pull the locking straps through the upholstery.
|
|
| 7. |
Replace the seat cushion in the car, see
.
|
|
