PRE-RELEASE
Throttle body (604)
| Throttle body (604) |
|
Location
|
|
Integrated in throttle body
|
|
|
Throttle motor
|
|
||
|
Type
|
Brushless
|
||
|
Resistance at 20 °C (68 °F) pin 10-5
|
Ohm
|
1.13±0.1
|
|
|
Control voltage
|
12 V PWM
|
600 Hz
|
|
Throttle position sensor 1
|
|
||
|
Throttle closed, pins 6-9
|
V
|
0.065-1.090
|
|
|
Throttle fully open, pins 6-9
|
V
|
3.930-4.775
|
|
Throttle position sensor 2
|
|
||
|
Throttle closed, pins 8-9
|
V
|
3.910-4.935
|
|
|
Throttle fully open, pins 8-9
|
V
|
0.025-1.070
|
|
Pedal position sensor 1
|
|
||
|
Pedal released, pins 1-9
|
V
|
3.990-4.645
|
|
|
Pedal fully depressed, pins 1-9
|
V
|
0.400-1.055
|
|
Pedal position sensor 2
|
|
||
|
Pedal released, pins 3-9
|
V
|
0.355-1.010
|
|
|
Pedal fully depressed, pins 3-9
|
V
|
3.945-4.600
|
|
All position sensors
|
|
||
|
Power supply
|
V
|
5
|
|
|
Resistance, potentiometer
|
Ohm
|
2k±400
|
|
|
Resistance, potentiometer output
|
Ohm
|
0.8 k
|
All the potentiometers are connected in parallel between 5V and ground. The total resistance is therefore approx. 500 ohms ± 100 ohms.
Avoid taking resistance readings during fault diagnosis. Use voltage readings for the respective position sensors instead.
