SAAB WIS ONLINE

PRE-RELEASE

Charge air cooler

Charge air cooler

To remove


1. Remove Front bumper shell .

2. Remove the lower shield of the charge air cooler.


3. Suspend the condenser with 83 95 212 Strap .

4. Remove the condenser bolts from the charge air cooler.


5. Raise the car.

6. Detach the charge air hoses from the charge air cooler and move the hoses aside.


7. Remove the nuts securing the power steering cooling coil.


8. Remove the cooler brackets from the subframe.

9. Undo the condenser from the charge air cooler and remove the charge air cooler from below.


To fit


1. Reposition the charge air cooler. Check that the locating pins are correctly positioned in the upper mountings.

2. Raise the radiator core and position and fit the lower mountings against the subframe.


3. Fit the nuts securing the power steering cooling coil.

Important

To reduce the risk of hoses mounted on the delivery side of the turbocharger coming loose due to low friction at high air pressure, the hoses and connecting pieces must be cleaned thoroughly before fitting. Use a rag dampened with 93 160 907 Motip Dupli cleaning agent to wipe clean inside the ends of the hoses. Clean the connecting pieces as well. If hose clips are rusty or damaged, they must be replaced so the correct clamping force is maintained.


4. Attach the hoses to the charge air cooler using new hose clips.


5. Lower the car to the floor.

6. Fit the condenser bolts to the charge air cooler.


7. Remove the strap from the condenser.

8. Raise the car and fit the lower shield of the charge air cooler.


9. Fit Front bumper shell .


PRE-RELEASE