PRE-RELEASE
Pre-installed trailer wiring
| Pre-installed trailer wiring |
A wiring harness for a towbar has been pre-routed. A 10-pin connector 258 is located in the centre of the rear plate in the luggage compartment. See Connection, towbar contact (258) .
The following lighting is fed via the connector:
|
Pin 1
|
Left direction indicator (from DICE)
|
|
Pin 2
|
Rear fog light (for monitoring unit, from DICE)
|
|
Pin 3
|
Rear fog lights
|
|
Pin 4
|
Right direction indicator (from DICE)
|
|
Pin 5
|
Right parking light
|
|
Pin 6
|
Brake light (from brake light switch 29 via fuse 6B)
|
|
Pin 7
|
Left parking light
|
|
Pin 8
|
Reversing lights
|
|
Pin 9
|
+30 (from fuse A)
|
|
Pin 10
|
+54 (from fuse 6)
|
| Fault diagnosis tips |
| 1. |
Check the electrical connections at the towbar electrical contact (risk of oxidation).
|
|
| 2. |
Check that there is voltage at each connection in connector 258.
|
|
| 3. |
Check the fuses and wiring harness.
|
|
