PRE-RELEASE
Steering swivel member
Steering swivel member |
To remove |
1. |
Remove the front wheel hub as described under
To remove
.
|
2. |
Remove the wheel sensor.
![]() |
3. |
Undo the nut securing the track-rod end and withdraw the track-rod end using
87 91 287 Puller, 150 mm
.
|
4. |
Remove the steering swivel member from the MacPherson strut. Hold the bolt steady and undo the nut.
Tap out the bolt. Use a new bolt on reassembly.
|
To fit |
2. |
Fit the track-rod end.
Tightening torque 35 Nm (26 lbf ft) ![]() |
3. |
Fit the front wheel hub, refer to
To fit
.
|