Rear bumper shell/cellular block, 4D
|
|
Rear bumper shell/cellular block, 4D
|
|
1.
|
Remove the bumper. See
Rear bumper, 4D
. Place the bumper shell on a protected surface.
|
|
2.
|
Remove the cellular blocks.
|
|
3.
|
Cars with SPA
: Remove the connector from the holder.
|
|
4.
|
Detach the bumper rail from the protective shell by releasing the retaining clips.
|
|
5.
|
Remove the cellular block from the bumper shell (wedged into the protective shell's retaining wedges).
|
|
6.
|
Cars with SPA
: Remove the connectors.
|
|
7.
|
When replacing the bumper shell, transfer the lower spoiler.
|
|
1.
|
Cars with SPA
: When replacing the cellular block, transfer the wiring harness. Plug in the connectors.
|
|
2.
|
Fit the cellular blocks in the bumper shell.
|
|
3.
|
Cars with SPA
: Make sure the connector holder is correctly positioned on the bumper rail.
|
|
4.
|
Guide the bumper rail into the bumper shell guide pin. Fit the bumper rail to the bumper shell.
|
|
5.
|
Cars with SPA
: Fit the connector on the holder.
|
|
6.
|
Fit the cellular blocks.
|
