PRE-RELEASE
Engine oil thermostat
| Engine oil thermostat |
| 1. |
Raise the car, remove the cover and unscrew the plug.
|
|
| 2. |
Remove the adapter housing or loosen the A/C-compressor slightly.
|
|
| 3. |
Extract the spring and thermostat.
|
|
To fit
| 1. |
Fit the thermostat and spring. Make sure that the thermostat rests on the flange before it bottoms in the thermostat housing.
|
|
| 2. |
Check the seal and sealing face and fit the plug.
Turning torque 60 Nm (44 lbf ft). |
|
| 3. |
Fit the adapter housing or A/C compressor, see
Oil filter adapter housing
.
|
|
| 4. |
Lower the car, fit the cover and check the oil level. Top up as necessary.
|
|
