Draining of fuel tank, US/E85
|
|
Draining of fuel tank, US/E85
|
Warning
|
|
Emptying the fuel tank involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection with this work:
|
|
•
|
Work only in a well-ventilated area! If approved equipment for the extraction of fuel vapours is available, be sure to use it.
|
|
•
|
Wear suitable gloves! Prolonged contact with fuel can cause skin irritation or dermatitis.
|
|
•
|
Keep a class BE fire extinguisher near at hand. Be mindful of the danger of sparks caused by short circuits and when connecting and disconnecting leads in electrical circuits.
|
|
•
|
No smoking anywhere in the vicinity.
|
|
•
|
Wear protective goggles.
|
|
|
|
|
|
The fuel tank has no drain plug. When work on the fuel system requires the tank to be drained, this should be done with suitable tank draining equipment.
|
Important
|
|
Scrupulous cleanliness is of the utmost importance when working on the fuel system. Prevent dirt, etc. from entering the fuel tank and fuel lines.
|
|
|
|
1.
|
Check the fuel level. If the tank is full, drain the filler pipe with the tank draining tool to prevent fuel spill.
|
|
3.
|
Detach the filler pipe from the tank:
|
|
|
•
|
Remove the screw (A) holding the filler pipe in place.
|
|
|
•
|
Undo the hose clips (B) and detach the filler pipe from the tank. Detach the ventilation pipe (C) with
83 95 261 Fuel line tool
.
|
|
4.
|
Use the fuel draining tool to drain the tank through the filler pipe connection.
|
|
1.
|
Connect the filler pipe to the tank:
|
|
|
•
|
Attach the filler pipe to the tank and tighten the hose clips (B). Fit the ventilation pipe (C).
|
|
|
•
|
Fit the screw (A) that secures the pipe. If the car has a plastic screw, fit a new one.
Tightening torque, plastic screw 1.5 Nm (1 lbf ft)
|
|
2.
|
Lower the car to the floor.
|
