PRE-RELEASE
Fog lights
| Fog lights |
| Removal |
| 1. |
Raise the car.
|
|
| 2. |
Unplug the connector.
|
|
| 3. |
Remove the lamp housing.
|
|
| Refitting |
| 1. |
Fit the lamp housing.
|
|
| 2. |
Spray with “Kontakt 61” and plug in the connector.
|
|
| 3. |
Lower the car.
|
|
| 4. |
Adjust the lamp, se
.
|
|
| 5. |
Ensure that the on/off function of the fog lights comply with legal requirements.
|
|
| Replacement of lamp bulb |
| 1. |
Raise the car.
|
|
| 2. |
Remove the bulb socket by slightly rotating it anticlockwise.
|
|
| 3. |
Unplug the connector.
|
|
| 4. |
Replace the bulb
|
|
| 5. |
Plug in the connector.
|
|
| 6. |
Fit the lamp socket and rotate it clockwise.
|
|
| Programming |
| • |
Alternative 1 - The front fog lights may be on independently of the main and dipped beams if the light switch (10) is in position 1 or 2.
|
|
| • |
Alternative 2 - The front fog lights cannot be turned on when the main beam is on. The light switch must be in position 2 for headlamp alternative 3 and in position 1 or 2 for headlamp alternatives 1 and 2.
|
|
| • |
Alternative 3 - The front fog lights can be turned on if the light switch is in position 2 and the main beam is on or if the light switch is in position 1 (no headlamps).
|
|
