PRE-RELEASE
Light cluster in the boot lid, 4D
| Light cluster in the boot lid, 4D |
| Removal |
| 1. |
Remove
The boot lid trim, 4D
|
|
| 2. |
Unplug the light cluster connector
|
|
| 3. |
Remove the rubber plug
|
|
| 4. |
Remove the nuts.
|
|
| 5. |
Remove the light cluster by pushing in the clip.
|
|
| Refitting |
| 1. |
Check that the seal is correctly positioned and is undamaged. Position the light cluster and push it securely in place.
|
|
| 2. |
Fit the light cluster nuts.
Tightening torque up to and including M06 10 Nm (7 lbf ft) Tightening torque from and including M07 8 Nm (6 lbf ft) |
|
| 3. |
Fit the plug.
|
|
| 4. |
Fit the connector.
|
|
| 5. |
Fit the boot lid trim.
|
|
| Replacement of lamp bulb |
| 1. |
RH:
Remove the handle.
|
|
| 2. |
Free the trim on the appropriate side.
|
|
| 3. |
Remove the bulb socket by rotating it.
|
|
| 4. |
Remove and change bulb.
|
|
| 5. |
Fit the bulb socket by rotating it.
|
|
| 6. |
RH:
Fit the handle.
|
|
| 7. |
Fit
The boot lid trim, 4D
.
|
|
