PRE-RELEASE
SPA control module, 5D
| SPA control module, 5D |
| 1. |
Raise the rear seat cushions and tip the entire rear backrest forward.
|
|
| 2. |
Remove the front luggage compartment floor, 2 clips, so that the front part of the bottom trim becomes accessible.
|
|
| 3. |
Remove the 3 clips that secure the front edge of the bottom trim.
|
|
| 4. |
Undo the 2 connectors.
|
|
| 5. |
Remove the control module, 2 nuts.
|
|
| To fit |
| 1. |
Fit the control module and secure with the 2 nuts.
|
|
| 2. |
Plug in the 2 connectors, grey to grey and back to black.
|
|
| 3. |
Fit the front part of the bottom trim with the 3 clips.
|
|
| 4. |
Press home the front part of the floor.
|
|
| 5. |
Raise the rear backrest and lower the seat cushions.
|
|
