PRE-RELEASE
Trionic T7 engine management system 4-cyl (Part 4/4)
| Trionic T7 engine management system 4-cyl (Part 4/4) |
| List of components |
| No. | Name Location | Illustration |
|
|
Components |
|
|
22a
|
Fuse box, dashboard
on the dashboard end by the driver's door |
|
|
102
|
Relay, fuel pump,
on the main relay board in the dashboard |
|
|
229
|
Main relay, engine control system,
on the main relay board in the dashboard |
|
|
271
|
Heating element, heated oxygen sensor,
integrated in the heated oxygen sensor |
|
|
589
|
Trionic control module, 4-cyl petrol,
in space (cabin side) in front of windscreen on passenger side |
|
|
592Fa
|
Heated oxygen sensor 1,
in front of the catalytic converter |
|
|
592Ra
|
Heated oxygen sensor 2,
after the catalytic converter |
|
|
|
24-pin connector |
|
|
H24-1
|
Grey connector in middle of bulkhead partition (engine compartment side)
|
|
|
|
80-pin connector |
|
|
H80-1
|
In the connector bracket under the LH A-pillar
|
|
|
|
Crimp connectors |
|
|
J16
|
LHD:
Approx. 20 mm from cable tie on Trionic control module connector
RHD: Approx. 35 mm from cable tie on the Trionic control module connector |
|
|
J17
|
Approx. 70 mm from the cable tie on the connector for the Trionic engine control module.
|
|
|
J20
|
Approx. 115 mm from branching of crankshaft position sensor towards connector H24-1 and H24-2
|
|
|
J55
|
LHD:
Approx. 125 mm from branching point DICE control module towards the main relay board
RHD: Approx. 430 mm from branching of grounding point G42 towards DICE control module |
|
|
J58
|
LHD:
Approx. 280 mm from branching of MIU/SID towards DICE control module
RHD: Approx. 260 mm from rear edge of DICE control module connector towards the engine bay |
|
