Ball joint, steering swivel member
|
|
Ball joint, steering swivel member
|
|
1.
|
Raise the car.
If a jack is used, safety stands should be placed under the car.
|
|
3.
|
Remove the ball joint from the steering swivel member.
|
|
4.
|
Remove the ball joint from the suspension arm.
|
|
1.
|
Clean the ball joint's seat on the suspension arm.
|
|
2.
|
Fit the ball joint to the suspension arm.
Tightening torque 60 Nm +30° (44 lbf ft +30°)
|
|
3.
|
Fit the ball joint and bolt to the steering swivel member.
Warning
|
|
Make sure that the journal on the ball joint sticks up above the steering swivel member mounting.
|
|
|
|
|
|
Tightening torque 49 Nm (36 lbf ft).
|
|
4.
|
Fit the wheel, see
Wheels
.
Tightening torques
aluminium wheel 110 Nm (81 lbf ft)
steel wheel 50 Nm + 2x90°, max. 110 Nm (37 lbf ft + 2x90°, max. 81 lbf ft)
|
|
5.
|
Lower the car to the floor.
|
