PRE-RELEASE
Boot lid 4D, adjustment
| Boot lid 4D, adjustment |
| Adjusting the height of the entire boot lid |
Adjust the height of the boot lid by loosening the screws holding the hinges to the body and moving the hinges up or down.
| Adjusting the front of the boot lid |
| 1. |
Loosen the front two screws on the hinges.
|
|
| 2. |
Loosen the rear retaining screw just enough to allow the front of the hinge to be adjusted upwards or downwards.
|
|
| 3. |
Then tighten the front screw and check fit and function.
|
|
| 4. |
Tighten the remaining screws.
|
|
| Adjusting the rear of the boot lid |
The position of the rear of the boot lid when it is closed is determined by the two rubber buffers mounted on it.
| 1. |
Adjust the buffers by screwing them in or out.
|
|
