PRE-RELEASE
Boot lid 4D, lock
| Boot lid 4D, lock |
| To remove |
| 1. |
Remove the
Boot lid trim, 4D
.
|
|
| 2. |
Remove the cover.
|
|
| 3. |
Turn the clip securing the locking rod for the lock motor driver and detach the locking rod.
|
|
| 4. |
Unscrew the three screws holding the lock.
|
|
| 5. |
Take out the locking rod and the lock.
|
|
| 6. |
Remove the connector.
|
|
| 7. |
Transfer the locking rod to the new lock.
|
|
| To fit |
| 1. |
Plug in the lock's connector.
|
|
| 2. |
Position the lock with locking rod.
|
|
| 3. |
Screw on the lock.
|
|
| 4. |
Fit the clip holding the locking rod to the lock motor driver.
|
|
| 5. |
Fit the cover
|
|
| 6. |
Fit the
Boot lid trim, 4D
.
|
|
