Changing battery in key remote
|
|
Changing battery in key remote
|
|
1.
|
Open the cover by pressing in/down in the hole using a small screwdriver 1.2-1.4 mm in diameter.
|
|
2.
|
Press the retaining heel away from the battery.
|
|
1.
|
Insert the new battery under the two contacts and then press down to secure the battery under the retaining heel.
|
|
2.
|
Fit the cover.
|
Important
|
|
Make sure the lid is fitted correctly and is properly sealed to comply with waterproof requirements.
|
|
|
|
|
3.
|
Press the remote's unlocking button at least 4 times to synchronize the remote with TWICE.
|
Note
|
|
The car must be within range when this is done.
|
|
|
4.
|
After synchronizing, the direction indicators should flash when the remote is operated.
|
