PRE-RELEASE
Rear doors
| Rear doors |
| 1. |
Open the front door so that the grommet for the rear door wiring harness in the B-pillar is accessible.
|
|
| 2. |
Remove the rubber grommet and unplug the connector.
|
|
| 3. |
Open the rear door.
|
|
| 4. |
Unscrew the door stop.
|
|
| 5. |
Unscrew the nut on the lower hinge mounting first.
|
|
| 6. |
Unscrew the nut from the upper hinge mounting while supporting the door.
|
|
| 7. |
Carefully lift off the door from the hinge mountings.
|
|
| To fit |
| 1. |
Lift the door onto the hinge mountings.
|
|
| 2. |
Screw on the nuts.
|
|
| 3. |
Check the fit between the rear door and the wing and tighten the nuts.
|
|||||||
| 4. |
Screw on the door stop.
|
|
| 5. |
Plug in the connector and fit the rubber grommet.
|
|
