PRE-RELEASE
Tailgate 5D, adjustment
| Tailgate 5D, adjustment |
| 1. |
Open the tailgate.
|
|
| 2. |
Remove the hinge seals from the tailgate.
|
|
| 3. |
Unscrew the tailgate from the hinges.
|
|
| 4. |
Adjust up (backwards) or down (forwards).
|
|
| 5. |
Adjust sideways.
|
|
| 6. |
Tighten the screws.
|
|
| 7. |
Fit the hinge seals.
|
|
| Adjusting the tailgate up and down. |
| 1. |
Open the tailgate.
|
|
| 2. |
Remove the side supports.
|
|
| 3. |
Pull off the sealing strip far enough to access the covers.
|
|
| 4. |
Certain cars
: Remove the side covers.
|
|
| 5. |
Certain cars
: Remove the upper cover.
|
|
| 6. |
Remove the D-pillar trim, roof cover, cargo net holders, clips and covers between the C and D-pillars.
|
|
| 7. |
Pull down the headlining slightly. Do not crease it.
|
|
| 8. |
Undo the three screws on each hinge (one screw is on the inside).
Tightening torque, screw, inside 20 Nm (14 lbf ft) 
|
|
| 9. |
Adjust the tailgate by raising or lowering it.
|
|
| 10. |
Tighten the tailgate.
|
|
| 11. |
Hold up the headlining and fit the roof cover, D-pillar trim and covers between the C and D-pillars and the cargo net holders.
|
|
| 12. |
Fit the cover in the tailgate aperture.
|
|
