PRE-RELEASE
Interior rear-view mirror with automatic antidazzle function
| Interior rear-view mirror with automatic antidazzle function |
| To remove |
| 1. |
Remove the ceiling light lens using
82 93 474 Removal tool
. Start at the rear edge of the lens.
|
|
| 2. |
Remove the screw to the ceiling light bracket and remove the bracket.
|
|
| 3. |
Remove the temperature sensor from the holder.
Cars with alarm: Unplug the glass breakage sensor connector. |
|
| 4. |
Undo the rear-view mirror connector from the holder. Unplug the rear-view mirror connector.
|
|
| 5. |
Take out the screws and remove the mirror.
|
|
| To fit |
| 1. |
Position the rear-view mirror and fit the screws. Plug in and fit the mirror's connector.
|
|
| 2. |
Fit the temperature sensor to the holder.
Cars with alarm: Plug in the glass breakage sensor connector. 
|
|
| 3. |
Press home the ceiling light bracket so that the clips fasten.
|
|
| 4. |
Fit the screw and the ceiling light glass. Start fitting the rear edge of the glass and then press in the front edge of the glass.
|
|
| 5. |
Check the rear-view mirror antidazzle function, see
Checking operation of rear-view mirror with antidazzle function
. Eliminate any diagnostic trouble codes.
|
|
