Automatic antidazzle rear-view mirror, fault diagnosis hints
|
|
Automatic antidazzle rear-view mirror, fault diagnosis hints
|
The interior rear-view mirror with automatic antidazzle function can be activated when the ignition switch is in the drive position (+54).
The ADM control module is grounded by pin 8 (via crimp 46) to grounding point G42 (LHD) or G40 (RHD).
ADM control module is supplied voltage with +54 to pin 3 and +15 to pin 5.
|
1.
|
Check that fuses 21 and 2 are intact and supplied with current.
|
|
2.
|
Check that the rear-view mirror control module (637) is supplied with current.
|
|
3.
|
Check the wiring harness, connectors and ground connections.
|
