PRE-RELEASE

Tilt function does not work.

Read the instructions below then start the fault diagnostic procedure.

Symptom: Tilt function does not work. Manual setting with switch and memory setting works.

Tilt function does not work.

Fault symptoms

Tilt function does not work. Manual setting with switch and memory setting works.

Probable cause

Fault in wiring harness or switch

Diagnostic help

A switch readout can be obtained with the diagnostic tool.

Check the wiring

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.