PRE-RELEASE
High-level brake light 5D
| High-level brake light 5D |
| To remove |
| 1. |
Open the tailgate.
|
|
| 2. |
Remove the glass cover plates.
|
|
| 3. |
Unscrew the nuts securing the brake light and unplug the connector.
|
|
| 4. |
Unscrew the screws and remove the circuit board with LEDs.
|
|
| To fit |
| Important | ||
|
Take care not to damage the guide pins when fitting the circuit board. |
||
| 1. |
Screw on the circuit board.
|
|
| 2. |
Fit the brake light and tighten the nuts alternately.
|
|
| 3. |
Fit the glass cover plates.
|
|
