PRE-RELEASE
Luggage compartment trim, floor panel, 4D
| Luggage compartment trim, floor panel, 4D |
| 1. |
Lower the rear seat backrest.
|
|
| 2. |
Undo 2 screws (B) that secure the floor panel trim to the floor.
|
|
| 3. |
Undo the clips (A) that hold the floor panel at the front edge, x 6.
|
|
| To fit |
| 1. |
Fit the clips (A) that hold the floor panel at the front edge, x 6.
|
|
| 2. |
Screw in 2 screws (B) that secure the floor panel trim to the floor.
|
|
| 3. |
Raise the rear seat backrest.
|
|
