Output shaft speed sensor
|
|
Output shaft speed sensor
|
|
1.
|
Remove the battery cover and the battery.
|
|
2.
|
Remove the MAXI fuse board and place it to one side. Remove the battery tray.
|
|
3.
|
Disconnect the electrical distribution unit and move it aside.
|
|
4.
|
Clean the area round the sensor. Remove the retaining bolt and withdraw the sensor.
|
|
5.
|
Unplug the sensor's connector.
|
|
1.
|
Plug in the sensor's connector.
|
|
2.
|
Fit the sensor in place and tighten the retaining bolt.
Tightening torque: 6 Nm (4.5 lbf ft)
|
|
3.
|
Fit the electrical distribution unit.
|
|
4.
|
Fit the battery tray and MAXI fuse board.
|
|
5.
|
Fit the battery and battery cover.
|
|
6.
|
Set the right time on the clock.
|
