PRE-RELEASE

Drive shaft seal, right-hand

Drive shaft seal, right-hand

To remove

1.	Remove the intermediate shaft. See 4 Power transmission, Drive shafts, Adjustment and replacement.

2.	Remove the seal using a large screwdriver. Note Take care not to scratch the drive shaft seal hole in the gearbox.

To fit

1.	Tap in the new seal with drift 87 92 657.

2.	Fit the intermediate shaft according to 4. Power transmission, Drive shafts, Adjustment and replacement Fitting

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.