PRE-RELEASE
Intermediate shaft bearing, 4-cyl diesel
| Intermediate shaft bearing, 4-cyl diesel |
| To remove |
| 1. |
Place the intermediate shaft in a vice.
|
|
| 2. |
Remove the small circlip.
|
|
| 3. |
Press the shaft out of the bearing using
87 91 287 Puller, 150 mm
and
87 92 210 Support, differential bearing
.
|
|
| 4. |
Remove the large circlip.
|
|
| 5. |
Press out the bearing using
87 90 487 Sleeve, differential bearing
and
87 92 236 Support, for fitting F35 speed gear
as counterhold.
|
|
| Fitting |
| 1. |
Tap in the new bearing with a hammer and
83 90 189 Drift
and
87 90 461 Sleeve, bearing ring
. Use a vice or similar as support.
|
|
| 2. |
Fit the large circlip.
|
|
| 3. |
Press on the intermediate shaft with
87 90 487 Sleeve, differential bearing
|
|
| 4. |
Fit the small circlip.
|
|
